SYNOLOGY-RAID-MIB DEFINITIONS ::= BEGIN

IMPORTS
	OBJECT-GROUP, MODULE-COMPLIANCE
				FROM SNMPv2-CONF
	enterprises, MODULE-IDENTITY, OBJECT-TYPE, Integer32
				FROM SNMPv2-SMI;

synoRaid MODULE-IDENTITY
    LAST-UPDATED "201309110000Z"
    ORGANIZATION "www.synology.com"
    CONTACT-INFO
         "postal:   Jay Pan
          email:    jaypan@synology.com"
    DESCRIPTION
        "Characteristics of the raid information"
    REVISION     "201309110000Z"
    DESCRIPTION
        "Second draft."
    ::= { synology 3 }
    
synology	 OBJECT IDENTIFIER 
	::= { enterprises 6574 }

raidTable OBJECT-TYPE
    SYNTAX	   SEQUENCE OF RaidEntry
    MAX-ACCESS	  not-accessible
    STATUS	   current
    DESCRIPTION
    "Synology raid table"
    ::= { synoRaid 1 }

raidEntry	  OBJECT-TYPE
    SYNTAX	   RaidEntry
    MAX-ACCESS	  not-accessible
    STATUS	   current
    DESCRIPTION
    "For all raid entry"
    INDEX   { raidIndex }
    ::= { raidTable 1 }

RaidEntry ::= SEQUENCE {
    raidIndex		Integer32,
    raidName		OCTET STRING,
	raidStatus		Integer32
}

raidIndex OBJECT-TYPE
    SYNTAX	   Integer32(0..2147483647)
    MAX-ACCESS	  not-accessible
    STATUS	   current
    DESCRIPTION
    "The index of raid table"
    ::= { raidEntry 1 }

raidName OBJECT-TYPE
    SYNTAX	  OCTET STRING
    MAX-ACCESS  read-only
    STATUS	  current
    DESCRIPTION
    "Synology raid name
	 The name of each raid will be showed here.
	"
    ::= { raidEntry 2 }

raidStatus OBJECT-TYPE
    SYNTAX	  Integer32(1..12)
    MAX-ACCESS  read-only
    STATUS	  current
    DESCRIPTION
    "Synology Raid status
	 Each meanings of status represented describe below.
	 Normal(1): The raid functions normally.
 	 Degrade(11): Degrade happens when a tolerable failure of disk(s) occurs.
 	 Crashed(12): Raid has crashed and just uses for read-only operation.

	 Note:
	 Other status will be showed when creating or deleting raids, including below status, Repairing(2), Migrating(3), Expanding(4), Deleting(5), Creating(6), RaidSyncing(7), RaidParityChecking(8), RaidAssembling(9) and Canceling(10).
	"
    ::= { raidEntry 3 }


raidConformance OBJECT IDENTIFIER ::= { synoRaid 2 }
raidCompliances OBJECT IDENTIFIER ::= { raidConformance 1 }
raidGroups 			OBJECT IDENTIFIER ::= { raidConformance 2 }

raidCompliance MODULE-COMPLIANCE
    STATUS  current
    DESCRIPTION
            "The compliance statement for synoRaid entities which
            implement the SYNOLOGY RAID MIB."
    MODULE  -- this module
        MANDATORY-GROUPS { raidGroup }

    ::= { raidCompliances 1 }

raidGroup OBJECT-GROUP
    OBJECTS { raidName,
              raidStatus}
    STATUS  current
    DESCRIPTION
            "A collection of objects providing basic instrumentation and
            control of an synology raid entity."
    ::= { raidGroups 1 }

END