cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
ccybermonk
Engaged Sweeper
Is possible to be able to see what monitor was connected to a machine and remove.
I try to use this old report but is not working.

https://www.lansweeper.com/Forum/yaf_postsm38032_Add-history-for-monitor-connect-to-a-machine.aspx#post38032

Because of the pandemic and users WFH a lot monitors are missing.

1 REPLY 1
ErikT
Lansweeper Tech Support
Lansweeper Tech Support

Note that monitor changes will only be tracked if the History checkbox of the Monitor item is ticked under Scanning > Scanned Item Interval

ErikT_0-1659512743168.png

In the example above, the monitors are only scanned every 14 days. Which is configured OOTB. You can change 14 to 1 to scan the monitor information every other day or 0 to scan it daily.