I'm trying to upload FutureSmart_v1_4.mib from HP and it fails with error "Unable to locate definition for Syntax integer." Not sure where to go from here. I'm hoping to get firmware information from OID scanning.
I am scanning the network and I can find all the switches, but the problem is that any stacked switch will show only the one master switch, it does not show the rest of the stacked switches! is there a way that I can get the information of the other ...
Hi All, So we've had Lansweeper since ~2006, We had a great deal and purchase price with the tool for years and it's provided us with the best support it was 1 and a half years ago Lansweeper started to announce the new pricing structure which we hav...
Lansweeper is not scanning mobile devices (android, ios). What to do ?
Hello everyone, please help!Is it possible to split the values in a column into different columns?Выберите Top 1000000 tblAssets.AssetID, tblAssets.AssetName, tsysAssetTypes.AssetTypeIcon10 As Icon, tblAssets.IPAddress, tblAssetCustom.Model, tblAsset...
Hi,I have setup SSO with our Azure platform using OIDC - sadly I did this before finding out that adding verifying the domain is irreversible - (that warning needs to be at the top!!), so I cannot change to SAML.I have set the token email_verified to...
Hey Support,We have about 40 hikvision cameras in our network. We recently installed lansweeper but we are not able to scan those camera's. It says the scan is successful but no info is given. Can you help us with that?
Being a LS newbie i seem to have a steep learning curve in front of me. running version 10.xx, it is not clear to me what the snmp importer actually does !does it literally import the mibs / structure into the LS db and uses that while scanning or do...
Cant find the mib that is compatible with my current version of Firmware (22.X). Anyone have a thought on how i can probe for these?
Hello,There does not seem to be an option to pull the status data which can reveal potential motherboard errors. I am assuming that this field can be pulled with a custom/modification, but I am not sure how to do that. Can someone confirm that this d...
Hello, need some help trying to identify which OID is used for HP FutureSmart 5 memory capacity identification. Already sorted through the official HP list posted here https://developers.hp.com/futuresmart-mib but not having any luck. I thought it w...
I am having troubles with Lansweeper scanning SNMP of our switches. We disabled v1/v2 in favor of v3. We configured v3 on the switches and tested using the Device Tester tool with success. I made sure that it responded to OID 1.3.6.1.2.1.1.2.0 as a ...
Hello,I'm trying to retrieve the content of a Aruba chassis switch using custom OIDs. As we cannot have wildcards for scanning, I have to create 114 OIDs for this ...This is working perfectly fine if I stay below 72 custom OIDs.I tried by using the d...
First off big shoutout to @Esben_D for his assistance in getting this working.Short Story: We are a construction company that has a bunch of printers through a printer vendor. These printers tend to move around a bit when projects finish up and start...
I have been trying to get LS to scan the attached OID's but every rescan shows No Information Found. I have gone through the troubleshooting steps at https://www.lansweeper.com/knowledgebase/troubleshooting-custom-oid-scanning-issues/ but the only th...
