cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
dsch
Engaged Sweeper
Hi,

i already read this post "http://lansweeper.com/forum/yaf_postst3455_Device-classification-is-wrong-or-misleading.aspx" regarding the classification, but isn't there a way to change this in general ? We have a couple of hundred Voip phones and regarding to lansweeper they are all "Mail servers".
Maybe there is a way to say that all devices from a certain manufacturer are "Voip Phones" ?
1 ACCEPTED SOLUTION
Hemoco
Lansweeper Alumni
A device is classified as an IP phone if :

1) sip port is open
2) snmp is enabled and the OID is in the lookup table (this is the best way to classify all ip phones)

View solution in original post

1 REPLY 1
Hemoco
Lansweeper Alumni
A device is classified as an IP phone if :

1) sip port is open
2) snmp is enabled and the OID is in the lookup table (this is the best way to classify all ip phones)