cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Lansweeper
Lansweeper Tech Support
Lansweeper Tech Support

TL;DR-Sweepy-Icon (1).png
This page provides information on scanning Windows computers with or without a scanning agent.


There are two main ways to scan a Windows computer: with a scanning agent or without a scanning agent.
Both options return the same data, but the scanning agent allows for offsite scanning and is immune to credential and firewall issues.

Outlined below are the requirements for scanning Windows domain computers with or without an agent. Lansweeper will pull most Windows computer data from Windows Management Instrumentation (WMI), a management framework built into Windows operating systems. Some data is pulled directly from the client machine's registry as well.

Requirements for scanning without a scanning agent

To scan a Windows domain computer without an agent, the computer must meet the following requirements:

  • Architecture
    32-bit or 64-bit
  • Operating system
    Windows XP or any more recent Windows operating system.
  • Firewall
    As Lansweeper pulls most Windows computer data from WMI, you need to ensure that WMI traffic is allowed through your client machines and other firewalls.
By default, Windows sends WMI data over random ports, as explained in this Microsoft knowledge base article. There are three options to ensure the data stream: 
  1. Configure your firewalls to allow all WMI traffic. Windows Firewall includes a remote administration exception that you can enable to allow WMI traffic, as explained in this knowledge base article. For third-party firewalls, consult your firewall's documentation.
  2. Configure a fixed WMI port and allow traffic through that port.
  3. If you are unable to allow WMI traffic through your firewalls, scan your computers with the LsPush scanning agent instead, which does not require firewall reconfiguration.
The firewall on the scanning server must whitelist Lansweeperservice.exe to make outbound connections and correctly scan your network.
  • Credentials
    You must provide Lansweeper with a username/password combination that has administrative privileges on the client machine and, for scanning Active Directory information, read-only access to Active Directory.
  • Installed software
    No Lansweeper software is required on the client machine you're scanning. You do need to ensure that the Windows Management Instrumentation service is running on the machine, as this is what Lansweeper will use to retrieve data.

Requirements for scanning with a scanning agent

To scan a Windows domain computer with our LsAgent scanning agent, the computer must meet the following requirements:

  • Architecture
    32-bit or 64-bit
  • Operating system
    Windows 7 SP1 or any more recent Windows operating system
  • Firewall
    No firewall reconfiguration required
  • Credentials
    No credentials required
  • Installed software
    The LsAgent software needs to be installed on the client machine you want to scan. After collecting an inventory of the computer it's installed on, LsAgent sends scanned data back to your Lansweeper installation, either directly or through our relay server in the cloud.
Was this article helpful? Yes No
17% helpful (1/6)

New to Lansweeper?

Try Lansweeper For Free

Experience Lansweeper with your own data.
Sign up now for a 14-day free trial.

Try Now

New to Lansweeper?

Try Lansweeper For Free

Experience Lansweeper with your own data.
Sign up now for a 14-day free trial.

Try Now
Version history
Last update:
‎09-13-2023 11:25 AM
Updated by: