Showing results for 
Show  only  | Search instead for 
Did you mean: 
Engaged Sweeper III
There are some devices that are not getting picked up by the LS IP scan. Is there any way to force a scan of a single IP address?
Lansweeper Alumni
- Create a range consisting of a single IP in the IP Address Range Scanning section of Configuration/Scanning Setup/Scanning Methods.
- Hit the Disable All IP Ranges button.
- Re-enable only the required range.
- Hit the Scan All Enabled IP Ranges Now button.

Devices need to have one or more of the following protocols enabled in order to be scanned: FTP, HTTP, HTTPS, JetDirect, SIP, SMTP, SNMP (SNMPv1 or SNMPv2), SSH or Telnet. If available, SNMP is generally used. You can run the following tool on your Lansweeper server to test connections to specific IP addresses and see which protocols are enabled: