SUPERMICRO IPMI snmp

[talomer40]

Hi,

I have alot of SUPERMICRO servers, they are connected to IPMI dedicated port, in the scan they apear as linux, i want to use SNMP, in the device tester scanning snmp shows - "SNMP disabled or wrong community"

on the server:
ipmitool> lan print 1
Set in Progress : Set Complete
Auth Type Support : NONE MD2 MD5 PASSWORD
Auth Type Enable : Callback : MD2 MD5 PASSWORD
: User : MD2 MD5 PASSWORD
: Operator : MD2 MD5 PASSWORD
: Admin : MD2 MD5 PASSWORD
: OEM : MD2 MD5 PASSWORD
IP Address Source : DHCP Address
IP Address : 172.30.40.158
Subnet Mask : 255.255.0.0
MAC Address : 00:25:90:4e:cc:b0
SNMP Community String : public

what am i doing wrong?

[Hemoco]

If you are seeing the message “SNMP disabled or wrong community”, that means that either:
• SNMP is disabled on the device.
• The SNMP community string submitted for the connection test is wrong. Note that community strings are case sensitive.
• SNMP traffic is being blocked/redirected.

You will need to check your network settings and the device’s SNMP settings.