Hello everyone,
First of all I'm a newbie in the world of networks, so be patiente
.
My problem is that I can not find a devices connected to AP devices.
In my case is a Ubiquiti Bullet M2, where I put a PC and a GPS. So the thing is that I need to know if the devices are connected to the network or not. So I activated the SNMP protocol on the AP and make the scan with Lansweeper(SNMP v1v2) on public community, but lansweeper only read my AP's MAC(Lan and Wifi MAC card) and the subnetwork cant detect any device. So I would like to know where is my problem or If I have to take another way to find this devices.
I've attached a screen of my Lansweeper read and my AP lan configuration.
Thank you for your time.
AP LAN configuration
Lansweeper AP SNMP Info
this is the information receive from the Device Tester
First of all I'm a newbie in the world of networks, so be patiente
.My problem is that I can not find a devices connected to AP devices.
In my case is a Ubiquiti Bullet M2, where I put a PC and a GPS. So the thing is that I need to know if the devices are connected to the network or not. So I activated the SNMP protocol on the AP and make the scan with Lansweeper(SNMP v1v2) on public community, but lansweeper only read my AP's MAC(Lan and Wifi MAC card) and the subnetwork cant detect any device. So I would like to know where is my problem or If I have to take another way to find this devices.
I've attached a screen of my Lansweeper read and my AP lan configuration.
Thank you for your time.
AP LAN configuration
Lansweeper AP SNMP Info
this is the information receive from the Device Tester
Lansweeper DeviceTester 7.1.0.1
Scanning Lansweeper Service (on this machine)..
Status: Running
Version: 8.0.130.35
Pinging 10.12.58.208
Ping ok.
TTL: 63
Scanning TCP ports..
Open ports:
22 (SSH)
80 (HTTP)
Closed ports:
21 (FTP)
23 (Telnet)
25 (SMTP)
135 (EPMAP)
139 (NetBIOS Session Service)
443 (HTTPS)
445 (SMB)
9100 (Jetdirect)
16992 (Vpro HTTP)
16993 (Vpro HTTPS)
Scanning DNS..
Could not scan DNS.
Scanning netbios (UDP)..
Could not scan netbios
Scanning SIP..
Error: Socket exception TimedOut: Se produjo un error durante el intento de conexión ya que la parte conectada no respondió adecuadamente tras un periodo de tiempo, o bien se produjo un error en la conexión establecida ya que el host conectado no ha podido responder
Scanning SSH..
SSH server: SSH-2.0-OpenSSH_7.8
Error: No password
Scanning SNMP..
ObjectID: 1.3.6.1.4.1.41112.1.4
Hostname: Prueba Gps
Description: Linux 2.6.32.71 #1 Wed Jul 15 16:28:17 EEST 2020 mips
Uptime: 1d 21h 32m 49s 0ms
Contact: Bullet_BancoPrueba
Location: Oficina
MAC 2: 18 E8 29 75 19 1A
MAC 3: 1A E8 29 75 19 1A
MAC 4: 18 E8 29 74 19 1A
MAC 5: 18 E8 29 74 19 1A
Interfaces: 5
Scanning VPRO RMCPPing..
No reply to RMCP ping
Scanning DNS-SD..
No reply to DNS-SD
Scanning UPNP..
No reply to UPNP
Done.
