When scanning a linux based HP Thin Client using SSH the connected monitors are not shown as dmidecode must not provide the information, I have found the information is stored in the Xorg.0.log file if this file was parsed then the monitors could be added to the asset list. For example
[ 9.219] (II) AMDGPU(0): Serial No: NPNRT81J2RGB
[ 9.219] (II) AMDGPU(0): Monitor name: DELL P2417H
[ 9.219] (II) AMDGPU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 9.219] (II) AMDGPU(0): EDID (in hex):
My site only has around 200 thin clients but typically sites will have many more, I think this could be useful for others and getting a 100% asset list is everyones goal
