cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
sseal
Engaged Sweeper III
This was closed before I could respond to clarify.

on the report "All Webserver items" some items that do not have a hostname specified list the "Device Name" as the ip address.

Since this is the webserver report, the ip should be replaced by the title of the wepage it is serving.

This would greatly help in identifying what the "Webserver" really is. Most of ours are really config pages for printer devices and could easily be identified as such since the main webpage title is "Equitrac web admin"
5 REPLIES 5
sseal
Engaged Sweeper III
and here is the device tester putput for the printers that don't have an assigne dname but do have a http page title:
SNMP Not active or community name wrong
Port 139 is Closed
FTP port is open
FTP enabled
220 JD FTP Server Ready.
Telnet port is open
SMTP port is closed
HTTP port is open
HTTP server: Virata-EmWeb/R6_2_1
HTTP title:


10.10.32.112


HTTPS port is open
HTTPS error: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
SIP port 5060 is closed
HP jetdirect port 9100 is open
SSH port 22 is closed

Scanning done!
sseal
Engaged Sweeper III
here is the device tester output:
SNMP Not active or community name wrong
Port 139 is Closed
FTP port is closed
Telnet port is closed
SMTP port is closed
HTTP port is open
HTTP error: The server committed a protocol violation. Section=ResponseStatusLine
HTTPS port is closed
SIP port 5060 is closed
HP jetdirect port 9100 is closed
SSH port 22 is closed

Scanning done!

sseal
Engaged Sweeper III
Oops, spoke to soon, I have 18 devices (equitraq printing release stations) that have the http tittle "Equitrac web admin" but only list as their respective IP's in the list. other devices seem to be working tho
Hemoco
Lansweeper Alumni
sseal wrote:
Oops, spoke to soon, I have 18 devices (equitraq printing release stations) that have the http tittle "Equitrac web admin" but only list as their respective IP's in the list. other devices seem to be working tho

Could you post a screenshot of the webpage and the output of the device tester please.
sseal
Engaged Sweeper III
Thank you for adding this on the latest beta [march 12th]. Could you also add this feature for printers that don't have any other name supplied? Most printers at least specify the brand and sometimes model in the main http tittle