cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
stth
Engaged Sweeper
Hi,
Was just wondering if there is a way to monitor the network traffic (Bandwith) from clients (NIC) with lansweeper?

Thanks
1 ACCEPTED SOLUTION
Nick_VDB
Champion Sweeper III
Lansweeper will give back an estimate of the current bandwidth in bits per seconds. This is scanned from the Win32_NetworkAdapter WMI class and is stored in the tblNetworkAdapter table in the Lansweeper database.

Lansweeper does not give back the bandwidth usage in real time of the machines. This would require Lansweeper to continually scan your assets which is not how Lansweeper was designed.

View solution in original post

1 REPLY 1
Nick_VDB
Champion Sweeper III
Lansweeper will give back an estimate of the current bandwidth in bits per seconds. This is scanned from the Win32_NetworkAdapter WMI class and is stored in the tblNetworkAdapter table in the Lansweeper database.

Lansweeper does not give back the bandwidth usage in real time of the machines. This would require Lansweeper to continually scan your assets which is not how Lansweeper was designed.