→ 🚀What's New? Join Us for the Fall Product Launch! Register Now !

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
tcooper
Engaged Sweeper III
I have SNMP turned on for my Cisco devices and it works fine. Is it possible to pull the IP per port to link the port to a device when the MAC isn't available?
1 ACCEPTED SOLUTION
Nick_VDB
Champion Sweeper III
Unfortunately this is not possible in Lansweeper. It was decided beforehand not to use the IP address of a device as they are not as unique as a MAC address and could cause Lansweeper to wrongly identify the device connected to the switch port.

View solution in original post

2 REPLIES 2
tcooper
Engaged Sweeper III
Thank you for the reply.
Nick_VDB
Champion Sweeper III
Unfortunately this is not possible in Lansweeper. It was decided beforehand not to use the IP address of a device as they are not as unique as a MAC address and could cause Lansweeper to wrongly identify the device connected to the switch port.