‎05-21-2019 07:39 AM
2019-05-21 09:50:01,409 [DEBUG] : Waiting for next scheduled scan...
2019-05-21 10:05:01,415 [INFO ] : CreateReachableEndPoint for <CLOUD-RELAY-AUTHENTICATION-KEY>
2019-05-21 10:05:01,420 [INFO ] : Url Check with address failed. Endpoint with address 'https://<LOCAL-LANSWEEPER-IP>:9524/lsagent' was not reachable: No such device or address No such device or address
2019-05-21 10:05:01,420 [WARN ] : Connection to url https://<LOCAL-LANSWEEPER-IP>:9524/lsagent failed
2019-05-21 10:05:01,422 [INFO ] : Url Check with address failed. Endpoint with address 'http://<LOCAL-LANSWEEPER-IP>:9524/lsagent' was not reachable: No such device or address No such device or address
2019-05-21 10:05:01,422 [WARN ] : Connection to url http://<LOCAL-LANSWEEPER-IP>:9524/lsagent failed
2019-05-21 10:05:01,422 [DEBUG] : Created RelayCommunicationSender to URL https://relay.lansweeper.com/EchoService.svc
2019-05-21 10:05:02,747 [DEBUG] : Asset is enabled.
2019-05-21 10:05:02,747 [DEBUG] : Retrieving configuration...
2019-05-21 10:05:03,075 [DEBUG] : Updating local config
2019-05-21 10:05:03,079 [DEBUG] : Checking version.
2019-05-21 10:05:03,079 [DEBUG] : No installer found.
2019-05-21 10:05:03,079 [DEBUG] : Update needed to version 7.1.110.1
2019-05-21 10:05:03,430 [DEBUG] : Waiting for schedule...
2019-05-21 10:05:03,431 [DEBUG] : Waiting for next scheduled scan...
Solved! Go to Solution.
‎06-01-2019 05:56 AM
‎06-01-2019 05:56 AM
‎05-22-2019 10:13 AM
‎05-22-2019 11:15 AM
Esben.D wrote:
If it still doesn't show up after some time, you can take a look at your Lansweeper errorlog or contact support.
/bin/bash: xl: command not found
/bin/bash: prtdiag: command not found
/bin/bash: /usr/sbin/prtdiag: No such file or directory
/bin/bash: /usr/sbin/eeprom: No such file or directory
uname: invalid option -- 'X'
Try 'uname --help' for more information.
/bin/bash: lshal: command not found
‎05-22-2019 11:03 AM
Esben.D wrote:
What's your scanning schedule set to? It almost seems like it is still waiting to be triggered.
<LsAgentConfigItem>
<Type>Trigger</Type>
<Settings>
<DataItem>
<Key>Type</Key>
<Value>FullScan</Value>
</DataItem>
<DataItem>
<Key>ScheduleName</Key>
<Value>Daily at Midday</Value>
</DataItem>
<DataItem>
<Key>StartDateTime</Key>
<Value>05/22/2019 01:37:12</Value>
</DataItem>
<DataItem>
<Key>Interval</Key>
<Value>864000000000</Value>
</DataItem>
<DataItem>
<Key>WeekDays</Key>
<Value>0</Value>
</DataItem>
<DataItem>
<Key>MonthDays</Key>
<Value>0</Value>
</DataItem>
<DataItem>
<Key>ExecutionMode</Key>
<Value>Daily</Value>
</DataItem>
</Settings>
</LsAgentConfigItem>
Experience Lansweeper with your own data. Sign up now for a 14-day free trial.
Try Now