cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Nezrym
Engaged Sweeper
It does not work sending reports. Probably not pass the authorization on smtp server.
8 REPLIES 8
Hemoco
Lansweeper Alumni
I can't see it in the screenshot, did you selected a mailgroup after the checkbox?
Also change the "from" address, your mailserver will most likely refuse this one.
Nezrym
Engaged Sweeper
Lansweeper wrote:
I can't see it in the screenshot, did you selected a mailgroup after the checkbox?
Also change the "from" address, your mailserver will most likely refuse this one.

Thanks for the tip-off. I found where there was a problem. Do not pay any attention at once. It was necessary for each report, select the mail group.
The sender address for the smtp server does not necessarily change.
Hemoco
Lansweeper Alumni
Are you sure that you filled in all other required data, could you send a screenshot please.
Nezrym
Engaged Sweeper
Lansweeper wrote:
Are you sure that you filled in all other required data, could you send a screenshot please.

Yes of course
Hemoco
Lansweeper Alumni
Do you have any error in your errorlog.txt file?
Nezrym
Engaged Sweeper
Lansweeper wrote:
Do you have any error in your errorlog.txt file?

I tried to specify the address of smtp server DNS name and IP address.
The file error.txt wrote "cannot be scanned, no open ports" for the client machine. I found no records relating to the server smtp.
Hemoco
Lansweeper Alumni
See this thread: http://www.lansweeper.com/forum/yaf_postst3143_Email-reports-not-working.aspx
Nezrym
Engaged Sweeper
Lansweeper wrote:
See this thread: http://www.lansweeper.com/forum/yaf_postst3143_Email-reports-not-working.aspx

In Lansweeper 4 beta did not help. Not work.
I tried to specify the address of smtp server DNS name and IP address.
The file error.txt wrote "cannot be scanned, no open ports" for the client machine. I found no records relating to the server smtp.