
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
‎04-20-2010 09:34 PM
Scanned, and one of the printers that it detected is showing the Name of my LanSweeper server, and not it's name. The IP and other info are correct, just not the name.
I checked DNS and this printer is not in it. Just supprised that it is using the LanSweeper's name.
Solved! Go to Solution.
- Labels:
-
General Discussion

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
‎04-21-2010 07:05 PM
After some investigation, we found the host-name of the printer had been set to these names somehow. So we telnet'ed to all of them, changed the host name, and re-scanned them and now all is well. Hope maybe that might help.

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
‎04-21-2010 07:05 PM
After some investigation, we found the host-name of the printer had been set to these names somehow. So we telnet'ed to all of them, changed the host name, and re-scanned them and now all is well. Hope maybe that might help.

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
‎04-21-2010 06:07 PM
BUT...
Deleted it...
Verified that I could not see it..
Rescanned...
Results...
State: Active
Type: Printer
IP: 192.168.81.153
Name: isotest213.msfg.wan
Model: HP LaserJet 8150 Series
Vendor: Hewlett-Packard
OID: 1.3.6.1.4.1.11.2.3.9.1
Description:
HP ETHERNET MULTI-ENVIRONMENT,ROM G.07.19,JETDIRECT,JD33,EEPROM G.08.49


- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
‎04-21-2010 05:39 PM
if you delete the printer and rescan does it still display the same name?

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
‎04-21-2010 04:50 PM
Pinging 192.168.81.153 with 32 bytes of data:
Reply from 192.168.81.153: bytes=32 time=9ms TTL=57
Reply from 192.168.81.153: bytes=32 time=9ms TTL=57
Reply from 192.168.81.153: bytes=32 time=8ms TTL=57
Reply from 192.168.81.153: bytes=32 time=8ms TTL=57
Ping statistics for 192.168.81.153:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 8ms, Maximum = 9ms, Average = 8ms
C:\Documents and Settings\install18>

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
‎04-21-2010 04:03 PM

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
‎04-21-2010 04:01 PM
Snmp OID: 1.3.6.1.4.1.11.2.3.9.1
Snmp Hostname:
Snmp Description: HP ETHERNET MULTI-ENVIRONMENT,ROM G.07.19,JETDIRECT,JD33,EEPROM G.08.49
Snmp Contact:
Snmp Location:
Snmp PrinterName: HP LaserJet 8150 Series
SNMP Active
FTP port is closed
Telnet port is open
SMTP port is closed
HTTP port is closed
HTTPS port is closed
SIP port 5060 is closed
HP jetdirect port 9100 is open
SSH port 22 is closed
Device is a printer
Scanning done!

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
‎04-21-2010 08:53 AM

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
‎04-20-2010 10:22 PM
C:\>nslookup 192.168.81.153
Server: dns.msfg.wan
Address: 192.168.2.38
*** dns.msfg.wan can't find 192.168.81.153: Non-existent domain
C:\>nslookup isotest213
Server: dns.msfg.wan
Address: 192.168.2.38
Name: isotest213.msfg.wan
Address: 192.168.2.213
C:\>

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
‎04-20-2010 10:01 PM
Is this pointing to the lansweeper server?
