cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
seraphielx
Engaged Sweeper III
The Cisco phones have a ton of information displayed on their webpages.
Is there anyway that it can be parsed and displayed in lansweeper?

You can access the webpage and get basic device information with this url

https://<IP Address>/CGI/Java/Serviceability?adapter=device.statistics.device
This page will show the following:

MAC Address 00230434D21C
Host Name SEP00230434D21C
Phone DN 2092
App Load ID jar42sccp.9-0-2ES2.sbn
Boot Load ID tnp42.8-3-1-21a.bin
Version SCCP42.9-0-2SR1S
Hardware Revision 6.0
Serial Number FCH123497SX
Model Number CP-7942G
Message Waiting No
UDI phone
Cisco Unified IP Phone 7942G, Global
CP-7942G
V03
FCH123497SX
Time 8:34:25a
Time Zone America/New_York
Date 08/14/14
System Free Memory 7406240
Java Heap Free Memory 2630328
Java Pool Free Memory 152536


Network configuration can be found at this page
https://<ip address>/CGI/Java/Serviceability?adapter=device.statistics.configuration

DHCP Server <DHCP Server>
BOOTP Server No
MAC Address 00230434D21C
Host Name SEP00230434D21C
Domain Name <domain name>
IP Address <ip address>
Subnet Mask 255.255.255.0
TFTP Server 1 <TFTP Server>
Default Router 1 <Default Route>
Default Router 2
Default Router 3
Default Router 4
Default Router 5
DNS Server 1 <Primary DNS>
DNS Server 2 <Secondary DNS>
DNS Server 3
DNS Server 4
DNS Server 5
Operational VLAN Id <VLAN ID
Admin. VLAN Id
Unified CM 1 <Call Manager> Active
Unified CM 2 <Call Manager> Standby
Unified CM 3
Unified CM 4
Unified CM 5
Information URL http://<Call Manager>:8080/ccmcip/GetTelecasterHelpText.jsp
Directories URL http://<Call Manager>:8080/ccmcip/xmldirectory.jsp
Messages URL
Services URL http://<Call Manager>:8080/ccmcip/getservicesmenu.jsp
DHCP Yes
DHCP Address Released No
Alternate TFTP No
Forwarding Delay No
Idle URL
Idle URL Time 0
Proxy Server URL
Authentication URL http://<Call Manager>:8080/ccmcip/authenticate.jsp
SW Port Configuration Auto Negotiate
PC Port Configuration Auto Negotiate
TFTP Server 2 <Secondary TFTP server>
User Locale English_United_States
Network Locale United_States
Headset Enabled Yes
User Locale Version 7.1.0.1(3)
Network Locale Version 7.1.0.1(1)
PC Port Disabled No
Speaker Enabled Yes
GARP Enabled Yes
Video Capability Enabled No
Voice VLAN Enabled Yes
Auto Line Select Enabled No
DSCP For Call Control CS3
DSCP For Configuration CS3
DSCP For Services Default
Security Mode Non Secure
Web Access Enabled Yes
Span to PC Port No
PC VLAN
CDP: PC Port Yes
CDP: SW Port Yes
LLDP-MED: SW Port Yes
LLDP: PC Port Yes
LLDP Power Priority Unknown
LLDP Asset ID
IP Addressing Mode IPv4 Only
IP Preference Mode Control V4
IPv6 Auto Configuration Yes
IPv6 Load Server
IPv6 Log Server
IPv6 CAPF Server
DHCPv6 Yes
IPv6 Address ::
IPv6 Prefix Length 0
IPv6 Default Router 1 ::
IPv6 DNS Server 1 ::
IPv6 DNS Server 2 ::
IPv6 Address Released No
IPv6 Alternate TFTP No
IPv6 TFTP Server 1 ::
IPv6 TFTP Server 2 ::


If you need more info I can save the page so you can have the html that is displayed.
It is just in a table so it should be easy to parse the html to get the information out of it.
20 REPLIES 20
Kilian
Engaged Sweeper
We want this feature too
Carl527
Engaged Sweeper II
This would be a very useful feature for me too.
Mister_Nobody
Honored Sweeper II
Any update?
Entry model such as 3905 shows info via
http://IP/Device_Information.html
We need at least serial number and MAC info.
MichaelFunk
Engaged Sweeper II
Any update? I really need this as well...
JeffreyN
Engaged Sweeper II
We would also like to be able to see at least the Phone DN, any update on this request?
Susan_A
Lansweeper Alumni
We don't have a release date for this particular feature yet unfortunately. As our development team is currently focused on our Lansweeper 6.0 help desk update, which is in beta, any other features have low priority for now.
brownsnetwork
Engaged Sweeper II
Even with it being a low priority for Lansweeper, the PhoneDN field would be VERY important to us for relationship mapping. It makes the tool very hard to use without it for those of us "cloud" IP phone users. We use Cisco 7900 series phones through Shoretel and if I want to match up that one simple field I have to request a database export from them and match it all myself.
seraphielx
Engaged Sweeper III
It would be nice. I also noticed that you should be able to link the phones to computer.
If you have a cisco switch and a computer is plugged into the phone it is showing them linked on the port.




ajmataro
Engaged Sweeper III
I second this request.

At least get Phone DN (telephone number assigned to IP Phone), and if possible, link/copy to IP Phone user field.
Hemoco
Lansweeper Alumni
We've added this feature to our customer wish list, but we do not currently have a release date for it. (This will not be a priority to be honest. We are currently focused on finishing our help desk and deployment features.)