cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
cherryhealth
Engaged Sweeper
Has anyone dealt with turning the EWF Filter on or off using a deployment package in Lansweeper. We have 400 laptops we need to change the SSID on and don't want to have to touch each one. Can someone give me some direction if they have done something like this before. Were we are stuck is you can only turn the filter off while logged in as the administrator.

Thanks in advance
1 ACCEPTED SOLUTION
Bart_E
Lansweeper Employee
Lansweeper Employee
FYI this question was also answered via email. See our response below:

We assume you'll need to build a custom script for this and deploy it using the Lansweeper deployment feature. Unfortunately, we cannot provide support for creating custom scripts or deployment packages because each installation or situation is different and requires different deployment steps. General guidelines on creating deployment packages can be found in this section of our knowledge base.

View solution in original post

1 REPLY 1
Bart_E
Lansweeper Employee
Lansweeper Employee
FYI this question was also answered via email. See our response below:

We assume you'll need to build a custom script for this and deploy it using the Lansweeper deployment feature. Unfortunately, we cannot provide support for creating custom scripts or deployment packages because each installation or situation is different and requires different deployment steps. General guidelines on creating deployment packages can be found in this section of our knowledge base.