→ The Lansweeper Customer Excellence Awards 2024 - Submit Your Project Now! Learn More & Enter Here

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
hlynch
Engaged Sweeper II
I want to set a Target Scan for specific subnet

ex: 10.x.70.x are my printers

Is there a way to scan the subnet 70 for all my network ?

I dont want to scann 10.x.x.x totally because the scan never end this way.
4 REPLIES 4
ethanthekiwi
Engaged Sweeper II
What you could do is use an Excel formula like ="10."&A1&".70.0" to create a list of all the subnets then use the import template in Lansweeper. I used Powershell to export all the scopes from our Windows DHCP server to a CSV, then removed all the scopes we didn't want to scan from the spreadsheet.
TheITGuy
Engaged Sweeper III
You can manually create a subnet scanning by IP 10.1.70.1 - 10.5.70.254 All printer subnet

But if there are other devices that are configured for IP's within the ranges you have inbetween the printer subnets....well, see below:

You may need to create multiple scanning subnets instead of trying to do an all in one.

Like 10.1.70.2 - 10.1.70. 25 - printer subnet location 1.

Like 10.5.70.2 - 10.5.70. 25 - printer subnet location 2.


and since they are printers, they dont move so you can scan off hours.
WeatherDave
Engaged Sweeper II
We do /24-/27 scanning, but I'd be leery to try much larger. Lansweeper handles those contiguous subnets just fine.
hlynch
Engaged Sweeper II
Anyone else have Subnet allocated to specific devices ?