→ The Lansweeper Customer Excellence Awards 2024 - Submit Your Project Now! Learn More & Enter Here

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable
As test I installed Dropbox on my laptop and Lansweeper correctly detects it.
I then uninstalled Dropbox, but Lansweeper hasn’t removed it yet from my software list.

The scan time is set to 3 hours and I already did a manual scan of that asset.

The SW is not present anymore in the Programs and features list.

Do I need to be more patient, or is there something wrong ?
2 REPLIES 2
brandon_jones
Champion Sweeper III
Under the scanning menu click on the scanned item interval. Look for software and look at the number in the refresh coloum. That is the number of days that the installed software will be refreshed. So if a 3 is there it will refresh the software installed every 3 days. You can enter a 0 and it will be refreshed every scan. Hope this helps.
Anonymous
Not applicable
Brandon wrote:
Under the scanning menu click on the scanned item interval. Look for software and look at the number in the refresh coloum. That is the number of days that the installed software will be refreshed. So if a 3 is there it will refresh the software installed every 3 days. You can enter a 0 and it will be refreshed every scan. Hope this helps.


Thx, this was indeed the setting to change.