Can Lansweeper show which IP Address is on which switch and which port?

[wlampert]

How can I see what IP address is on which switch and which switch port its connected to?

[vqT4cDoP9iXyMZw]

The simple answer is that Lansweeper needs to be able to do a credentialed scan of both the switch, and the assets connected to the switch.

If Lansweeper has credentials for both and can do a full SNMP query of the switch, then viewing the switch asset will display all of the Network interfaces (ports) and which corresponding assets are connected to those under the Connection column.

Looking at it from the other end, when you view an edge asset the Network section will show the local interface information along with the corresponding switch asset name/description/port

There's a built-in report titled "Switch: Ports" that will show you most of the details though you'll probably want to add tblAssets.IPAddress like this:

Select Top 1000000 aaa.AssetID,
aaa.icon,
aaa.AssetName,
aaa.[If],
aaa.Type,
aaa.Admin,
aaa.MTU,
aaa.Speed,
aaa.[IP Address],
aaa.Mask,
aaa.Portname,
aaa.Vlan,
aaa.MacAddress,
tsysAssetTypes_1.AssetTypeIcon16 As icon2,
aaa.deviceassetid,
tblAssets.AssetName As deviceassetname,
aaa.AssetMacAddress,
tblAssets.IPAddress,
tblAssets.Description,
tblAssetCustom.Manufacturer,
tblAssetCustom.Model,
tblAssetCustom.Location,
tsysIPLocations.IPLocation,
tblAssets.Firstseen As [Created at],
tblAssets.Lastseen As [Last successful scan]
From (Select Top (1000000) tblAssets_1.AssetID,
tsysAssetTypes.AssetTypeIcon10 As icon,
tblAssets_1.AssetName,
tblSNMPInfo.IfIndex As [If],
tblSNMPIfTypes.IfTypename As Type,
Case
When tblSNMPInfo.IfAdminstatus = 1 Then 'Up'
When tblSNMPInfo.IfAdminstatus = 2 Then 'Down'
Else 'Testing'
End As Admin,
tblSNMPInfo.IfMTU As MTU,
Case
When (tblSNMPInfo.IfSpeed Is Null Or tblSNMPInfo.IfSpeed = 0) Then ''
When tblSNMPInfo.IfSpeed > 999999999 Then
Convert(nvarchar(255),Cast(tblSNMPInfo.IfSpeed / 1000000000 As float))
+ 'Gbit'
When tblSNMPInfo.IfSpeed > 999999 Then
Convert(nvarchar(255),Cast(tblSNMPInfo.IfSpeed / 1000000 As float)) +
'Mbit'
Else Convert(nvarchar(255),Cast(tblSNMPInfo.IfSpeed / 1000 As float)) +
'Kbit'
End As Speed,
tblSNMPInfo.IfIPAddress As [IP Address],
tblSNMPInfo.IfMask As Mask,
tblSNMPInfo.IfMacaddress As MacAddress,
tblSNMPAssetMac.AssetMacAddress,
tblSNMPInfo.Portname,
tblSNMPInfo.Vlan,
tblAssetMacAddress.AssetID As deviceassetid
From tblSNMPInfo
Inner Join tblAssets As tblAssets_1 On tblSNMPInfo.AssetID =
tblAssets_1.AssetID
Inner Join tsysAssetTypes On tblAssets_1.Assettype =
tsysAssetTypes.AssetType
Left Outer Join tblSNMPIfTypes On tblSNMPInfo.IfType =
tblSNMPIfTypes.IfType
Left Outer Join (tblAssetMacAddress
Right Outer Join tblSNMPAssetMac On tblAssetMacAddress.Mac =
tblSNMPAssetMac.AssetMacAddress) On tblSNMPInfo.IfIndex =
tblSNMPAssetMac.IfIndex And tblSNMPInfo.AssetID =
tblSNMPAssetMac.AssetID
Where tblAssets_1.AssetID Is Not Null And tblAssets_1.Assettype = 6
Order By tblAssets_1.AssetName,
[If]) As aaa
Left Outer Join tblAssets On aaa.deviceassetid = tblAssets.AssetID
Left Outer Join tsysAssetTypes As tsysAssetTypes_1 On tblAssets.Assettype =
tsysAssetTypes_1.AssetType
Inner Join tblAssetCustom On tblAssetCustom.AssetID = tblAssets.AssetID
Left Outer Join tsysIPLocations On tblAssets.LocationID =
tsysIPLocations.LocationID