Post your unknown devices

[Hemoco]

Lansweeper tries to detect what type of device is discovered by the snmp OID.

You can help extending this database by posting your list of devices where the type is incorrect discovered.
After you made the correction please upload report "Device unique SNMP OID"

[itssn]

SnmpOID ItemTypename Device model Device vendor
1.3.6.1.4.1.236.11.5.1 Printer Dell 1815dn Samsung Electronics Co., LTD.
1.3.6.1.4.1.11.2.3.7.11.45 Switch HP ProCurve 2626 Hewlett-Packard
1.3.6.1.4.1.25053.3.4.3 Network device Ruckus Wireless, Inc.
1.3.6.1.4.1.11.1 Printer HP LaserJet 1022nw Hewlett-Packard
1.3.6.1.4.1.11.2.3.9.1 Printer HP Jetdirect Hewlett-Packard
1.3.6.1.4.1.1347.43.5.1.1.1 Printer KYOCERA Corporation
1.3.6.1.4.1.1347.41 Printer KYOCERA Corporation
1.3.6.1.4.1.318.1.3.2 Environment monitor APC American Power Conversion Corp.
1.3.6.1.4.1.11.2.3.7.11.19 Switch J4813A ProCurve Switch 2524 Hewlett-Packard
1.3.6.1.4.1.11.2.3.7.11.27 Switch J4887A ProCurve Switch 4104GL Hewlett-Packard
1.3.6.1.4.1.11.2.3.7.11.9 Switch HP J4121A ProCurve Switch 4000M Hewlett-Packard
1.3.6.1.4.1.18334.1.1.1.2.1.26.2.1 Printer KONICA MINOLTA HOLDINGS, INC.
1.3.6.1.4.1.2385.3.1.23.1.6 Printer SHARP Corporation
1.3.6.1.4.1.25053.3.0.0 Network device Ruckus Wireless, Inc.
1.3.6.1.4.1.253.8.62.1.20.2.21.1 Printer Xerox
1.3.6.1.4.1.25461.2.3.6 Firewall Palo Alto Networks PA-500 PALO ALTO NETWORKS
1.3.6.1.4.1.367.1.1 Printer RICOH Co. Ltd.
1.3.6.1.4.1.674.10898.10.52.1094473223 Printer Dell Inc.
1.3.6.1.4.1.8072.3.2.10 Linux Linux net-snmp

[joegasper]

We are up to 4 different printer models (and technically 2 different vendors) that use the same OID of 1.3.6.1.4.1.641.1, and this one, 1.3.6.1.4.1.11.1, I've seen 2 printers using. So if I removed these OIDs from the device list, then the scan will attempt to dynamically determine the Model, Vendor, and Type? Going to test to see how this looks.

[Hemoco]

In the latest build you can add your own OID's with the configuration utility

[Ponchohobono]

1.3.6.1.4.1.10418.3.1.15 KVM switch 4161DS Avocent Corporation

@joegasper
I went & double checked & those really are Lexmark printers. They are not the Dell rebranded ones.

[joegasper]

@Ponchohobono

Actually your:
1.3.6.1.4.1.641.1 Printer Lexmark Optra Lexmark International (This is a Lexmark Optra T614.)
is really a:
Dell Laser Printer 1700n
no wait it's really a:
Dell Laser Printer W5300

It's not a Lansweeper issue (may be one to deal with), but some of these devices are using the same OID values (see my earlier post on this thread a couple up).

Lansweeper with the latest build looks like they are pulling secondary values for these devices as now for me the Device Model is at least showing correctly (yeah!):

http://cid-34ab6a14a19ad611.skydrive.live.com/self.aspx/.Public/Lansweeper/same-OID-02.jpg
http://cid-34ab6a14a19ad611.skydrive.live.com/self.aspx/.Public/Lansweeper/same-OID-03-showing-device-type.jpg

They still show up as Hosts, not Printers, and the Vendor can be wrong. Trying to figure out where to help at this point.

[Ponchohobono]

1.3.6.1.4.1.641.1 Printer Lexmark Optra Lexmark International (This is a Lexmark Optra T614.)
1.3.6.1.4.1.1723.2.1.3 Network device Lantronix Pronet GmbH (This is a Lantronix Serial to Ethernet adapter.)
1.3.6.1.4.1.2385.3.1.51.1.5 Printer MX-M550N SHARP Corporation
1.3.6.1.4.1.1663.1.1.1.1.24 Fibre switch SB5600-08A G Ancor Communications (This is a QLogix SANbox fiber channel switch.)

I also had the DRAC from a Dell show up as a network device instead of a Remote Access Controller. It doesn't show up on the Device: Unique SNMP OID report. Let me know if you would liek any further details on it.

[joegasper]

Not sure you can do better on this one. It's an external HP JetDirect (USB connection). Mine is connected to a Dymo LabelWriter 400 Turbo as the JetDirect web interface shows. But smnp/http headers don't help.

http://cid-34ab6a14a19ad611.skydrive.live.com/self.aspx/.Public/Lansweeper/external-jetdir-but-label-printer.jpg

10.227.155.29 Ping OK
SMTP port is closed
SNMP Active
MAC address: 00-01-E6-92-D1-40
FTP port is closed
Telnet port is open
SMTP port is closed
HTTP port is open
HTTP error: The operation has timed out
HTTP headers:
HTTPS port is closed
SSH port 22 is closed
Displayname: prn013
Location: Campus
Description: HP ETHERNET MULTI-ENVIRONMENT,ROM M.22.01,JETDIRECT,JD89,EEPROM M.24.06,CIDATE 10/17/2002
Contact: helpdesk
ObjectID: 1.3.6.1.4.1.11.2.3.9.1

[joegasper]

http://cid-34ab6a14a19ad611.skydrive.live.com/self.aspx/.Public/Lansweeper/not-lexmark-01.jpg
http://cid-34ab6a14a19ad611.skydrive.live.com/self.aspx/.Public/Lansweeper/not-lexmark-02.jpg

And each of their devicetest dumps:

Again, you see the different printer models with the same OID.

10.5.123.28 Ping OK
SMTP port is closed
SNMP Active
MAC address: 00-12-80-49-4A-44
FTP port is open
FTP enabled
220 prn007 Dell Laser Printer 1700n FTP Server 141.C09 ready.
Telnet port is closed
SMTP port is closed
HTTP port is open
HTTP headers:
Content-Type: text/html
HTTP title:
HTTPS port is closed
SSH port 22 is closed
Device is a printer
Model: Dell Laser Printer 1700n 380DWY5 141.C09 -- Part Number --
Displayname: prn007
Location: Campus
Description: Dell Laser Printer 1700n version 141.C09 kernel 2.4.0-test6 All-N-1
Contact: helpdesk
ObjectID: 1.3.6.1.4.1.641.1


10.227.155.49 Ping OK
SMTP port is closed
SNMP Active
MAC address: 00-04-00-3D-8A-9A
FTP port is closed
Telnet port is closed
SMTP port is closed
HTTP port is open
HTTP headers:
Content-Type: text/html
HTTP title:
HTTPS port is closed
SSH port 22 is closed
Device is a printer
Model: Dell Laser Printer W5300 992P135 551.019 --- Part Number ---
Displayname: prn031
Location: Campus
Description: Dell Laser Printer W5300 version 55.10.87 kernel 2.4.0-test6 All-N-1
Contact: helpdesk
ObjectID: 1.3.6.1.4.1.641.1

[Hemoco]

Is it possible to post a screenshot of the webpage for one of the "Host Lexmark Optra Lexmark International"