Linux

[bernardo]

I need to know if I can scan linux machines that are working on an active directory enviroment

[bernardo]

Ok, I will look for this tip, but on the other hand, can you say something about why my linux server isnt show right on my lansweeper web?

[googoo]

In my configuration, Devicetester.exe is available in the web interface under 'advanced actions' when picking any device (not computer). I can't remember if I added this or not. But if you need to manually add it, using lsmanage.exe, under "configuration|custom actions|device actions", then use this for your action: {actionpath}devicetester.exe {ipaddress}

[bernardo]

Looking in this folder I found devicetester.exe, but I dont see it on web interface. Can I add this to actions panel on lansweeper web interface?

Below you can see the output when I run this utility with my linux server:

SNMP Not active or community name wrong
Port 139 is open
Port 135 is closed
MAC address: 00-18-F3-17-B8-A9
FTP port is closed
Telnet port is closed
SMTP port is closed
HTTP port is closed
HTTPS port is closed
SIP port 5060 is closed
HP jetdirect port 9100 is closed
SSH port 22 is open
uname - a : Linux lin386vm 2.6.34-12-default #1 SMP 2010-06-29 02:39:08 +0200 i686 i686 i386 GNU/Linux
uname - n : lin386vm
uname - s : Linux
uname - r : 2.6.34-12-default
uname - v : #1 SMP 2010-06-29 02:39:08 +0200
lshw -short : bash: lshw: command not found
product-name : bash: esxcfg-info: command not found
vendor-name : bash: esxcfg-info: command not found
df -h :
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 20G 3.0G 16G 16% /
devtmpfs 754M 216K 753M 1% /dev
tmpfs 754M 4.0K 754M 1% /dev/shm
/dev/sda3 1.8T 32G 1.7T 2% /var


Scanning done!

[googoo]

The server on which you installed the Lansweeper service, you should have an install path similar to: \program files\lansweeper\actions. Devicetester.exe should be in this location. You have no "actions" folder?

[bernardo]

I have nothing with this name

[bernardo]

What is the device tester?

[Hemoco]

bernardo wrote:
What is the device tester?

In the actions folder "devicetester.exe"

[Hemoco]

Can you use the device tester for this device and post the output please.

[bernardo]

I did this, and now lansweeper show it as "not scanned" pc. On this PC I see the following messages:
Cannot connect to DCOM port 135 : Firewalled? (lin386vm)
The RPC server is unavailable 0x800706BA (lin386vm, 10.1.210.35)

The pc has firewall off

[bernardo]

When I add this range, lansweeper automatically scan this machine or it has a delay?
On the other hand, can I launch a rescan of all of my network manually?