‎08-14-2024 07:43 AM
In our organization we have hundreds of printers and different software to manage them, so we don't want to have them all in Lansweeper. We added an exclusion so that printers are not scanned by Lansweeper. However, there was a need for printers from a certain IP range to be in Lansweeper.
How to configure Lansweeper to scan printers only in one (or several) IP ranges and not in the others?
Solved! Go to Solution.
‎08-16-2024 03:17 PM
Hello,
There's no real possibility at this moment to scan a specific asset type only, on an IP range.
But what you could do as a workaround is to set up an additional scanning server, for that range and exclude all asset types, but printers. In this way, you will only scan printers.
‎08-23-2024 08:12 AM
You have to move printer into specific vlans. 😉
‎08-16-2024 03:17 PM
Hello,
There's no real possibility at this moment to scan a specific asset type only, on an IP range.
But what you could do as a workaround is to set up an additional scanning server, for that range and exclude all asset types, but printers. In this way, you will only scan printers.
Experience Lansweeper with your own data. Sign up now for a 14-day free trial.
Try Now