Lansweeper OT

Install and configure Lansweeper OT to manage your OT assets.

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Knowledge Base Articles

Manage OT assets in Lansweeper Sites

This page explains how you can manage and edit your OT assets in Lansweeper Sites. Once you’ve installed Lansweeper OT, scanned your OT environment, and linked your OT installation to a cloud site, you can manage your OT assets from your site. Your...

sophie by Lansweeper Tech Support
  • 570 Views
  • 0 comments
  • 0 kudos

Transfer OT data between hubs

This page describes how to transfer your OT data between linked and unlinked Lansweeper Network Discovery Hubs. If you want full visibility of your IT & OT environments from one Lansweeper Network Discovery Hub, but require your OT environment to b...

sophie by Lansweeper Tech Support
  • 1115 Views
  • 0 comments
  • 0 kudos

Link OT with a Lansweeper cloud site

This page describes how to link your OT installation with a Lansweeper cloud site for access to Lansweeper's full capabilities.  This page is for Lansweeper Cloud. For Lansweeper Classic, see Link OT hub with Lansweeper Classic. Link your installat...

sophie by Lansweeper Tech Support
  • 1886 Views
  • 0 comments
  • 0 kudos

OT components and architecture

This page describes Lansweeper OT components and architecture, including the hub, the sensor, the update server, and Lansweeper Cloud. For more information about Lansweeper OT, see Lansweeper for OT Asset Management. Lansweeper OT enables organizati...

sophie by Lansweeper Tech Support
  • 2418 Views
  • 0 comments
  • 1 kudos

OT installation requirements

This page explains the various Lansweeper OT installation requirements.  This knowledge base article lists the requirements for installing Lansweeper OT. Make sure the machine you select for your OT installation meets the below prerequisites. Archit...

Susan_A by Lansweeper Alumni
  • 3171 Views
  • 0 comments
  • 0 kudos

Install Lansweeper OT

This page describes how to install Lansweeper OT on your machine and enable password authentication to the Discovery Hub. Lansweeper OT can detect and identify an organization's OT devices and systems such as programmable logic controllers (PLCs), f...

Susan_A by Lansweeper Alumni
  • 5131 Views
  • 0 comments
  • 0 kudos

Scan your OT

This page explains how you can scan your industrial OT devices with Lansweeper. Operational technology (OT) is a category of hardware and software that monitors and controls physical assets. Industrial OT can be found on factory floors, e.g. in asse...

Susan_A by Lansweeper Alumni
  • 9143 Views
  • 0 comments
  • 0 kudos

Add a secondary OT sensor

This page explains how to add a secondary sensor to Lansweeper OT. A Lansweeper OT installation consists of the Lansweeper Network Discovery Hub, one or more sensors, and an update service. A sensor is what actually scans your OT devices and sends s...

Susan_A by Lansweeper Alumni
  • 2227 Views
  • 0 comments
  • 0 kudos

Import scan targets

This guide describes how to bulk import scan targets to the Lansweeper Network Discovery Hub. If you have a large number of scan targets, you can bulk-import them to the Lansweeper Network Discovery Hub, rather than add scan targets individually. F...

sophie by Lansweeper Tech Support
  • 1703 Views
  • 0 comments
  • 0 kudos

OT supported protocols

This page provides information on the supported protocols for Lansweeper OT and instructions on adding custom protocol configurations. Lansweeper OT allows you to scan various vendors' devices with supported protocols.  Various protocols are support...

sophie by Lansweeper Tech Support
  • 2541 Views
  • 0 comments
  • 0 kudos

New to Lansweeper?

Try Lansweeper For Free

Experience Lansweeper with your own data.
Sign up now for a 14-day free trial.

Try Now