cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Mister_Nobody
Honored Sweeper II

There are new chart design in LS 12.1

But I sees some issues:

  1. now corners assign (top-right,...) and it was used then i have to re-save chart

2. there is not support qout - instead " « » i see  &# qout; &# 171;  &# 187;

 

6 REPLIES 6
FrankSc
Lansweeper Tech Support
Lansweeper Tech Support

Hi Mister_Nobody, 

This is very useful feedback. There were indeed a few changes applied in Chart reports. We regret to see that they seem to break some of your existing charts.
We've shortly tested this and see indeed some issues. We'll send them to our development team for further review and fixes.

Esben_D
Lansweeper Employee
Lansweeper Employee

I'll forward it to the team so they can have a look at it

Mister_Nobody
Honored Sweeper II

@Esben_D could you comment?

Do you have any plans to fix?

Mister_Nobody
Honored Sweeper II

>now corners assign (top-right,...) and it was used then i have to re-save chart

There is no corner's assigning (top-right,...) and if it was used then now  i have to re-save chart

Mister_Nobody
Honored Sweeper II

Cursor over chart shows &# 160; instead ASCII code 160 is represented by non-printing character also known as the non-breaking space.