Lansweeper 12.1 new charts issues

[Mister_Nobody]

There are new chart design in LS 12.1

But I sees some issues:

1. now corners assign (top-right,...) and it was used then i have to re-save chart

2. there is not support qout - instead " « » i see  &# qout; &# 171;  &# 187;

[FrankSc]

Hi Mister_Nobody, 

This is very useful feedback. There were indeed a few changes applied in Chart reports. We regret to see that they seem to break some of your existing charts.
We've shortly tested this and see indeed some issues. We'll send them to our development team for further review and fixes.

[Esben_D]

I'll forward it to the team so they can have a look at it

[Mister_Nobody]

@Esben_D could you comment?

Do you have any plans to fix?

[Mister_Nobody]

>now corners assign (top-right,...) and it was used then i have to re-save chart

There is no corner's assigning (top-right,...) and if it was used then now  i have to re-save chart

[Mister_Nobody]

Line chart is broken. 😪

Bar chart is broken.

Now it doesn't support multiline diagram.

https://community.lansweeper.com/t5/reports-analytics/chart-events-last-14-days/td-p/72848

https://community.lansweeper.com/t5/reports-analytics/chart-bios-and-monitor-ages/td-p/72844

https://community.lansweeper.com/t5/reports-analytics/chart-status-of-ad-users/td-p/73381

[Mister_Nobody]

Cursor over chart shows &# 160; instead ASCII code 160 is represented by non-printing character also known as the non-breaking space.